Table of Contents
- Introduction
- What Your Back Workout Should Train
- A Back Day Workout Routine
- Build a Dumbbell Back Routine at Home
- Can You Build Muscle With Bodyweight Exercises?
- How to Train Your Lower Back
- Pair Back and Biceps on the Same Day
- Strength Training for Muscle Growth
- How Often Should You Train Your Back?
- Fit Back Training Into a Full-Body Plan
- Recovery, Food, and Supplements
- Put Your Back Routine to Work
- FAQ
Introduction
A good back workout routine combines pulling exercises with controlled work for your lower back. Start with a pulldown or assisted pull-up, add a row, and finish with a manageable hip hinge.
That mix trains your back through different movements without requiring a long list of exercises. It can help you build the pulling strength you use in the gym, on a hike, or when carrying gear.
At BUBS Naturals, we believe a useful plan should fit your equipment and leave room to recover. We’ll cover a gym routine, home alternatives, and ways to progress.
The best routine is one you can perform consistently and make more challenging over time.
Creatine Monohydrate
BUBS Creatine Monohydrate is made with Creapure and supports muscle strength, endurance, and recovery. Pure, unflavored, NSF Certified.
Shop NowWhat Your Back Workout Should Train
Your back contains several muscle groups that work together. The lats run along the sides of your back and help pull your arms toward your body. The traps and rhomboids help move and control your shoulder blades.
The erector spinae are muscles that run along your spine. They help support your torso during movements such as a hip hinge, where you push your hips back and tip forward.
You don’t need a separate exercise for every muscle. A practical back day can cover a lot of ground with three patterns:
- Vertical pull: A pulldown or pull-up trains your back as you pull from overhead.
- Horizontal pull: A row brings resistance toward your torso and works your lats and upper back.
- Hip hinge: A Romanian deadlift challenges your hips and legs while your back muscles help support your torso.
These movements overlap. A row also uses your biceps, and a hip hinge works your glutes and hamstrings. That overlap is useful when you want an effective session without spending all day in the gym.
A Back Day Workout Routine
This session is a starting point for an adult who can exercise comfortably. Choose weights you can control, and complete the exercises in order.
Warm up with a few minutes of easy walking, cycling, or another comfortable activity. Then practice your first pull with a lighter weight before starting your working sets.
- Lat pulldown or assisted pull-up: 3 sets of 8 to 12 reps.
- Chest-supported row: 3 sets of 8 to 12 reps.
- Single-arm dumbbell row: 2 sets of 10 to 12 reps per side.
- Reverse fly: 2 sets of 12 to 15 reps.
- Dumbbell Romanian deadlift: 2 sets of 8 to 10 reps.
Rest for roughly one to two minutes between sets. Take longer after a demanding set if you need it to repeat the movement with control.
If you’re new to lifting, start with two sets each of the pulldown and supported row, plus one or two sets of the Romanian deadlift. Add the single-arm row and reverse fly later if you’re recovering well and want more work.
The goal is to finish most sets feeling that you could have completed another one or two good reps. You don’t need to reach the point where you can’t move the weight.
How to Perform the Main Pulls
For the lat pulldown, sit with your thighs secured under the pads and take a comfortable grip on the bar. Pull toward your upper chest, guide your elbows down, and return the bar overhead under control. Avoid rocking your whole body to move the weight.
For a chest-supported row, place your chest against the machine pad or an inclined bench. Let your arms reach forward, then pull the handles or dumbbells toward your sides. Lower them without lifting your chest off the support.
For a single-arm dumbbell row, support one hand and the same-side knee on a stable bench, with the other foot on the floor. Pull the dumbbell toward your side, then lower it slowly. Complete your reps before switching arms.
A reverse fly uses lighter resistance. With your chest supported or your hips hinged, raise your arms out to the sides with a slight bend in your elbows. Stop where you can keep the movement comfortable and controlled.
Key Takeaway: A vertical pull and a row make a solid foundation. Add more exercises when they serve your goal and fit your recovery, not just to make the workout longer.
Build a Dumbbell Back Routine at Home
A pair of dumbbells and a stable bench can take you a long way. Without a pulldown station or pull-up bar, use this session as an alternative to the gym workout:
- Single-arm dumbbell row: 3 sets of 8 to 12 reps per side.
- Chest-supported dumbbell row: 2 sets of 8 to 12 reps.
- Dumbbell reverse fly: 2 sets of 12 to 15 reps.
- Dumbbell Romanian deadlift: 2 sets of 8 to 10 reps.
If you don’t have an adjustable bench, replace the chest-supported row with a bent-over dumbbell row. Hinge at your hips, keep your torso steady, and pull both weights toward your sides. Use a load that lets you hold the position without repeatedly jerking upright.
The two rows use similar patterns, but the single-arm version lets you work each side separately. If the bent-over position makes your lower back tired before your upper back, reduce the load or do fewer sets.
Dumbbell rows don’t fully replicate an overhead pull. If you have access to a securely installed pull-up bar, you can add assisted pull-ups or chin-ups to train that pattern. If you don’t, the rows are still a useful way to train your back.
BUBS Collagen Club
Save 10% plus free shipping on every order, and get a FREE Welcome Kit worth $105 when you subscribe. Cancel anytime.
Join The ClubCan You Build Muscle With Bodyweight Exercises?
Yes. Bodyweight movements can build muscle when they challenge you and become harder as you get stronger. For your back, the main limitation is finding a safe way to pull.
Pull-ups and chin-ups train your back and arms using your body weight. A chin-up typically uses an underhand grip, while a pull-up typically uses an overhand grip. Choose a comfortable grip and use an assisted machine if you can’t yet perform controlled reps on your own.
An inverted row is another option if you have a bar or suspension trainer securely installed for that purpose. Hold the handles or bar, keep your body straight, and pull your chest toward your hands. Standing more upright generally makes the movement easier; moving your feet farther forward makes it more demanding.
Without a suitable bar or trainer, you can do floor movements such as reverse snow angels and bird dogs. They’re useful for controlled movement and endurance, but they may not provide enough resistance for continued back muscle growth. A dumbbell, resistance band, or properly installed pull-up bar gives you more ways to progress.
Don’t rely on an unstable table, an unsecured door, or an object that wasn’t designed to support your weight. A few safe reps are more useful than a makeshift setup that can move or break.
How to Train Your Lower Back
Your lower back works during many lifts, but it doesn’t need to carry the entire session. The Romanian deadlift is a practical place to learn how your hips and back work together.
Hold dumbbells in front of your thighs with your feet about hip-width apart. Soften your knees, brace your midsection, and push your hips back as the weights travel close to your legs. Lower only as far as you can maintain control, then stand by bringing your hips forward.
You may feel this movement in your hamstrings and glutes as well as your back. That’s expected. Keep the weights manageable, and finish standing tall rather than leaning backward at the top.
For a lower-load option, try a bird dog. Start on your hands and knees, reach one arm forward and the opposite leg back, and keep your torso steady. Return to the floor and switch sides.
A bird dog is a stability exercise, not a direct replacement for progressively loaded hinges if your goal is muscle growth. It can, however, be a useful starting point while you practice controlling your trunk.
If you have persistent back pain, an injury, or symptoms such as pain traveling down your leg, ask a healthcare professional or physical therapist for guidance. Stop an exercise if it causes sharp or worsening pain. This routine is for general strength training, not a rehabilitation plan.
Pair Back and Biceps on the Same Day
Back and biceps make a practical combination because your biceps already help bend your elbows during rows and pulldowns. Train your back first if that’s your priority, then add direct arm work.
After the main back routine, choose one of these options:
- Dumbbell curl: 2 sets of 8 to 12 reps. Keep your upper arms near your sides and lower the weights with control.
- Hammer curl: 2 sets of 8 to 12 reps. Keep your palms facing inward as you curl.
You can alternate the options across sessions or use both if you have the time and recover well. Start with a weight that lets you move your forearms without swinging your torso.
If your grip or arms tire before your back on rows, check the weight and slow down the lowering phase. Your biceps should work during a pull; feeling them doesn’t mean your back has switched off.
Strength Training for Muscle Growth
Building muscle requires a reason for your body to adapt. In training, that usually means doing challenging work and gradually increasing the demand over time.
One straightforward method is to use a rep range. Say your row calls for 8 to 12 reps. Choose a weight you can lift for at least 8 controlled reps, then work toward 12 across your sets.
When you can complete the top of the range with good control, increase the weight slightly at a later session. Your reps may drop back toward the lower end of the range, giving you room to build again.
Keep a simple training log with the exercise, weight, reps, and how the set felt. Progress won’t necessarily happen at every workout. Sleep, stress, food, and other training can all affect what you can do on a given day.
Training for strength and training for muscle overlap. If a stronger pull is your main goal, you can practice it with a heavier weight and fewer reps once you’re comfortable with the movement. For example, an experienced lifter might use sets of 4 to 6 on a row, while using 8 to 12 reps for other exercises.
Heavier work calls for careful warm-ups and enough rest to maintain control. If you’re learning the movement, build consistency before chasing a heavier number.
How Often Should You Train Your Back?
One dedicated back day can fit into a weekly plan, but it isn’t the only option. You can also split your pulling work across two full-body or upper-body sessions.
For example, do pulldowns and chest-supported rows on Monday. On Thursday, repeat the pulldown or use an assisted pull-up, then add a single-arm row and a hinge. Leave about two days between demanding back sessions as a practical starting point.
Count your other workouts, too. Heavy deadlifts, rowing sessions, climbing, and loaded carries can add to the work your back and grip need to recover from.
If you’re consistently sore, your performance is falling, or you dread the next session, consider reducing sets or adding recovery time. If the work feels manageable for several weeks, add reps, a little weight, or a set before changing the entire plan.
Fit Back Training Into a Full-Body Plan
A strong back is useful, but it’s one part of the picture. Across the week, include movements for your chest, legs, glutes, and arms as well.
For your chest, push-ups or dumbbell presses provide a pressing movement that complements rows. For your legs, squats and lunges train your thighs and glutes. Glute bridges or hip thrusts give you another way to work the gluteal muscles, often called the glutes.
Bodyweight versions can be a good starting point. As they become easier, you can add resistance or choose a harder variation. For example, progress from a bodyweight squat to a goblet squat by holding a dumbbell at your chest.
You don’t need to put every muscle-building exercise into one workout. A simple full-body day might include a squat, a push-up, a row, and a hip hinge. On another day, you could use a lunge, a press, a pulldown, and a glute bridge.
What About Expiratory Muscle Strength Training?
Expiratory muscle strength training uses resistance while breathing out. It addresses a different set of muscles and goals than rows or lower-back strength training.
It isn’t a substitute for a back workout. If you’re considering it for a breathing concern or a medical condition, ask a healthcare professional whether it’s appropriate and how to use it.
Recovery, Food, and Supplements
Training provides the challenge. Recovery gives you the opportunity to come back ready for the next session.
Eat enough to support your activity, and include protein-containing foods throughout the day. Meals can be straightforward: eggs and toast, yogurt and fruit, or rice with beans, chicken, or tofu. You don’t need to finish a shake immediately after your last rep for a workout to count.
Drink fluids around training, especially when you’re sweating, and make sleep part of your plan. If a long workday or hard outdoor session leaves you drained, it’s reasonable to reduce the workout rather than force every planned set.
Creatine helps your body recycle energy during short, high-intensity efforts. BUBS Naturals Creatine Monohydrate is an optional addition for people who want to include creatine in their routine. It doesn’t replace consistent training, food, or rest. Follow the product label and check with a healthcare professional if you have a medical condition or questions about using it.
Put Your Back Routine to Work
Start with a few movements you can perform well, then give them enough time to progress. A reliable routine beats changing exercises every time you walk into the gym.
- Use a vertical pull and a row when your equipment allows.
- Train your lower back alongside your hips with a controlled hinge.
- Record your reps and weights, and adjust the workload to your recovery.
Bottom line: Build the habit first, then add resistance as your strength and control improve.
Choose the gym or dumbbell routine, schedule your first session, and start with weights you can manage well. For an optional addition to that routine, explore BUBS Naturals Creatine Monohydrate.
FAQ
How many exercises should I do on back day?
A vertical pull, a row, and a hip hinge make a useful starting session. You can add a second row, reverse fly, or biceps exercise if you have the time and recover well. Beginners can start with fewer sets and build gradually.
Can I build my back with dumbbells only?
Yes. Dumbbell rows, reverse flys, and Romanian deadlifts can train your back with equipment you may already have at home. They don’t exactly replace an overhead pull, so add a pull-up variation if you have safe access to one.
Should I train back and biceps together?
You can. Rows, pulldowns, and chin-ups already involve your biceps, so adding curls after your back work is a practical option. Keep the direct arm work manageable, particularly when you’re starting out.
Do I need deadlifts to build a strong back?
No. Rows and pulldowns can train your upper back without a conventional barbell deadlift. A lighter Romanian deadlift or another comfortable hip hinge can add work for your hips, legs, and the muscles that support your torso.